Maury-Load Pull Analysis

This page contains some plots of Maury-Load Pull simulations as the simulations are being performed. The plot at the top of this page contains all the relfection coefficients to be simulated using a Z0 of 10ohms. The following plots contain the results for the partial simulation as determined by the "Points" plots.

Points for Z0=50 ohms

Pout for Z0=50 ohms

Gain for Z0=50 ohms

PAE for Z0=50 ohms

Points for Z0=10 ohms

Pout for Z0=10 ohms

Gain for Z0=10 ohms

PAE for Z0=10 ohms

Goto Research Page for Francis Rotella