Hardware for machines in the gloworm cluster
The gloworm cluster consists of an Blade 2500
server, several desktop SPARCs, several
printers, and other various peripherals(tape drives,
CDROM drives, and CD
Writer. Gloworm serves
as the main server, providing file, mail, and compute services. As
gloworm is the stable host name in the cluster, it should be used as
the machine for your email address.
More details on the
characteristics of the machines and peripherals are given below.
- Sun Blade 2500 running Solaris 9
- 2 1.28 GHz UltraSPARC IIIi CPU modules (each is rated at 696 SPECint2000,
1021 SPECfp2000)
- 10 GB main memory (12 GB swap)
- 140+ GB of user file space
- Located in CISX 334
- HP 9000/J6000
- 2 552 MHz PA8600 CPU modules (each is rated at 38.7 SPECint95,
59.7 SPECfp95)
- 8 GB main memory (10 GB swap). 64-bit executables (compiled
with +DA2.0W) can access all 8 GB. 32-bit executables are limited
to 1.9 GB if linked with "-N" (1 GB otherwise).
- Located in CIS second floor, machine room
- Sun UltraSPARC 2 Creator3D Model 2300 running Solaris 7
- 2 300 MHz UltraSPARC CPU modules (each is rated at 12.3 SPECint95,
20.2 SPECfp95)
- 1.0 GB main memory (1.2 GB swap)
- Located in CISX basement
- Sun UltraSPARC 10 Creator3D running Solaris 7
- 1 300 MHz UltraSPARC IIi CPU (rated at 12.1 SPECint95,
12.9 SPECfp95)
- 640 MB main memory (1.2 GB swap)
- Located in CISX 302
- Sun UltraSPARC 10 Creator3D running Solaris 7
- 1 333 MHz UltraSPARC IIi CPU (rated at 14.1 SPECint95,
18.1 SPECfp95)
- 640 MB main memory (1.2 GB swap)
- Located in CIS basement
- Sun SPARC Blade 100 running Solaris 8
- single 500 MHz UltraSPARC IIe CPU (rated at 174 SPECint2000, 182 SPECfp2000)
- more than 768 MB main memory (some with 2GB)
The names of these machines are:
- orthanc (2GB)
- barad-dur (2GB)
- dol-guldur (1280MB)
- osgiliath
- gondor
- argonath
- arnor
- minas-anor
- minas-ithil
- khazad-dum
- aglarond
- baranduin
- amon-sul
- erebor
- fangorn
Each of these machines hosts a 10+GB scratch partition under the
machine's name (e.g. /orthanc). These partitions are cross-mounted
to all machines in the cluster. Please create a unique directory
for your use. The filesystems are permanent (unlike /tmp, which is
cleared on a reboot), but it is
NOT BACKED UP. Do not store critical files on these partitions.
The following printers are officially part of the gloworm cluster.
They should work reliably.
pilsner
- HP Laserjet 4050N (w/PostScript) located in CISX 332
- general use
- default queue
- tray selection will work when using lp (e.g. "
lp -d pilsner
-o manual file.ps
"; see "man -M /opt/hpnp/man
net_ljx000
" for other options)
lager
- HP Laserjet 4M (w/PostScript) located in CISX B113 (northwest
set of cubicles)
- general use
The following printers are also configured on the gloworm cluster,
but they are not part of the gloworm cluster. They may not be
reliable.
Please only print small jobs on these printers. They belong to
other groups. The permission to continue spooling to these printers
depends on how you use them.
peaches
- HP Laserjet 5M (w/PostScript) located in CISX 300
- general use
tom, tom-hp, and tom-duplex
- Color HP Laserjet (w/PostScript) located in the hallway on the
third floor of CISX
- use only for color printouts
george
- HP Laserjet 5Si (w/PostScript) located CISX third floor hallway
- general use
softly
- HP Laserjet 5M (w/PostScript) located ???
- general use
bartlett
- HP Laserjet 5Si (w/PostScript) located on the first floor of CIS
- general use
- supports duplex (two-sided) printing
delicious
- unknown type located somewhere on the second floor of CIS
- general use
meeko
- unknown type located somewhere on the first floor of CIS
- general use
kiwi
- HP Laserjet 4 (w/PostScript) located somewhere on the first floor of CIS
- general use
-
- An Exabyte 8500 8mm tape drive is available for general use on gloworm in the CISX 334
/dev/rmt/0
is the rewind device, and
/dev/rmt/0n
is the norewind device. Use data grade
8mm tapes. Video tapes may not work reliably.
This is a high density 8mm tape drive; tapes written on this device
will not be readable on older 8200 (2.3GB) drives.
Using /dev/rmt/0l
(that's a lower
case "L" for low density, not the digit one) should work for
writing a low density tape that is readable on an older 8200 drive.
See man st
for more information.
- Other tape drives are available on the dsotape machine on the
second floor of Sweet Hall. This machine requires a Leland
account. For more information, see the DSOTAPE
information sheet.
- Most of the Suns have CD-ROM drives. The volume managment
software should automagically mount a data CD under /cdrom when
inserted. If the CD does not mount after 10 or so seconds, run
volcheck
. To unmount and eject the CD, run
eject
.
Solaris has an volume manager that will automatically mount a CD.
After you insert the CD, run volcheck
, then wait about
30 seconds, then cd
to /cdrom
. Do not
manually eject the CD. cd
to /
, and run
eject
to umount and eject the CD.
- The XP machine in CISX 335 has a CD-ROM Writer. It
supports CD-R media and CD-RW media. CD-R is the recommended media.
- Although there is software on the XP machine to burn CD's from local
file and directory sets, it may be better to create an ISO9660 image
file first under Unix (yes, the guy who wrote this is a Unix
bigot), especially if you want to preserve filenames, symlinks,
etc. for use as a live CD filesystem under Unix. The Unix-based
mkisofs
program will create the image. Sample usage is
mkisofs -a -d -J -l -L -R -o /scratch/file.iso /path/to/my/stuff
-a
includes all files
-d
omits appending a trailing period to file
names that don't have a period
-J
creates Joliet directory records (for Windows)
-l
allows full 32 character filenames
(instead of the braindead 8.3). These limitations do not
apply to the Joliet and Rock Ridge records.
-L
allows filenames to begin with a period
-R
created Rock Ridge records (supported by
most Unix systems for long filenames)
See the manpage for mkisofs
for a more detailed
explanation of the options.
mkisofs
may create images that are too large to fit
on a CD. Check the size of the .iso
file before
burning to make sure that it will fit on the media. Most CD-R
media holds 650MB.
Transfer the .iso
file to the XP machine (binary mode,
of course). Click on the .iso
file under XP
Explorer and create the CD.
- This CD writer is not to be used for violating copyrights.
Doing so is a violation of Stanford's Computer Usage Policy.
Floppy drives
- You can use the floppy drives on the XP workstations.
- Most of the Suns have floppy drives. After you insert a
DOS/Windows formatted floppy, use
volcheck
to get
the volume management software to mount it under /floppy. Be
sure to run eject
to unmount the floppy prior to
manually ejecting it.
action@gloworm.stanford.edu
Last modified: Mon Nov 15 16:32:31 PST 2004